Product Descriptions
Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD ( electrostatic discharge ) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, ( motherboard + LCD or screen ) connected audio cable and new replacement, power on, test finished. If test OK, please install If it can not show, please contact us at the very first time. And please do not force it to be installed in the mobile phone.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-blend. Over 90 degrees bent will cause black display.
Specification
Dimensions and Weight | Product weight: 0.1000 kg
Product size: 14.00 x 6.00 x 0.50 cm / 5.51 x 2.36 x 0.2 inches
Package weight: 0.1500 kg
Package size: 20.00 x 10.00 x 4.00 cm / 7.87 x 3.94 x 1.57 inches
Package Contents | Package Contents: 1 x LCD Screen and Digitizer Full Assembly Repair Part
