iPhone X Glass Lens Screen Repair Kit + Tools + Repair Guide

Product Description

Are you feeling down because of your damaged iPhone X glass lens screen? A broken glass lens doesn’t mean you will have to change the phone for a new one. That’s completely unnecessary. Why don’t you just repair or replace the iPhone X glass lens screen? It’s a cost-effective and smart solution. And to help you here, we have our iPhone X Glass Lens Screen Repair Kit ready for you. Our repair kit is easy to use and can be operated with your basic DIY skills. It carries all the required tools you need to perform the job. It even includes a convenient repair guide.

Call us or email us and one of our friendly China-based agents will help you with whatever you need. Also be sure to check out our FAQs for further information and answers to common questions.

If you want to attempt the repair yourself here are Repair Instructions:

The specific repair for your device may vary.

Viewing a repair video on YouTube prior to installation is recommended:

1. Apply a strip of clear packing tape across the cracked screen
2. Use the Pentalobe screwdriver to remove the bottom 2 screws.
3. Use the suction cup to pull up the screen and remove it from the rear case
4. Carefully lift up the screen assembly, disconnect the flex cables and fully remove the screen assembly from the rear case.
5. Use the heat source to slowly heat up the surface of your screen to loosen the glass adhesive
6. Once the adhesive softens, slide the pry tool between the glass and frame.
7. Insert the wire into to the exposed gap. Slide the wire gently down the length of the screen to safely separate the glass from the LCD.
8. Insert the picks as you go to keep the screen separated from the LCD.
9. Once the glass is separated, carefully clean the LCD to remove any leftover adhesive, dust or glass.
10. Test fit the included double-sided adhesive onto the frame, trim if necessary. Once satisfied with the fit, remove one side of the adhesive, press firmly into place.
11. Pull off the remaining adhesive backing and fit the new glass screen into place.
12. Press firmly on the edges to ensure a good seal between the glass and adhesive tape.
13. Watch repair videos on Youtube before attempting your repair.

Tips:

• Do not force or pry the screen apart, it could result in a damaged LCD.
• Ground yourself when repairing, you should be in a static-free environment
• Do not overheat the LCD when softening the glue on the screen with a heat source
• Keep organized, the screws are of different size and length. Mark and number the screws as you take them out to prevent damage

Compatibility

• iPhone X

Features

• Top notch OLED glass lens screen repair kit for iPhone X
• Bundled with all essential tools including, Small Phillips Screwdriver, Small Flathead Screwdriver, Pentalobe Screwdriver, Tri-Point Screwdriver, Plastic Opening Tools, Suction Cup, Nylon Spudger, Fine Tip Curved Tweezers, Micro Fiber Cleaning Cloth, SIM Card Ejection Tool
• Handy repair guide will guide you throughout the repair process
• Engineered particularly for iPhone X and hence you can be guaranteed of complete device compatibility