iPhone 12 Pro Max Glass Lens Screen Repair Kit + Tools + Repair Guide - White

Product Description

What would you do if your treasured iPhone 12 Pro Max ends up with a damaged glass lens screen? Some users will think of changing the phone altogether. But that’s certainly not suggested. There is no point in changing a phone altogether just because one of its parts is ruined. The smart option is to replace or repair the glass lens so that your phone can get back to its functional order. And the great news is you don’t have to waste time finding a technician for the repair. It’s because we have come up with a comprehensive iPhone 12 Pro Max White Glass Lens Screen Repair Kit with all the needed tools.

Call us or email us and one of our friendly China-based agents will help you with whatever you need. Also be sure to check out our FAQs for further information and answers to common questions.

If you want to attempt the repair yourself here are Repair Instructions:

The specific repair for your device may vary.

Viewing a repair video on YouTube prior to installation is recommended:

1. Apply a strip of clear packing tape across the cracked screen
2. Use the Pentalobe screwdriver to remove the bottom 2 screws.
3. Use the suction cup to pull up the screen and remove it from the rear case
4. Carefully lift up the screen assembly, disconnect the flex cables and fully remove the screen assembly from the rear case.
5. Use the heat source to slowly heat up the surface of your screen to loosen the glass adhesive
6. Once the adhesive softens, slide the pry tool between the glass and frame.
7. Insert the wire into to the exposed gap. Slide the wire gently down the length of the screen to safely separate the glass from the LCD.
8. Insert the picks as you go to keep the screen separated from the LCD.
9. Once the glass is separated, carefully clean the LCD to remove any leftover adhesive, dust or glass.
10. Test fit the included double-sided adhesive onto the frame, trim if necessary. Once satisfied with the fit, remove one side of the adhesive, press firmly into place.
11. Pull off the remaining adhesive backing and fit the new glass screen into place.
12. Press firmly on the edges to ensure a good seal between the glass and adhesive tape.
13. Watch repair videos on Youtube before attempting your repair.

Tips:

• Do not force or pry the screen apart, it could result in a damaged LCD.
• Ground yourself when repairing, you should be in a static-free environment
• Do not overheat the LCD when softening the glue on the screen with a heat source
• Keep organized, the screws are of different size and length. Mark and number the screws as you take them out to prevent damage

Compatibility

• iPhone 12 Pro Max A1864 (GSM/CDMA)
• iPhone 12 Pro Max A1897
• iPhone 12 Pro Max A1898

Features

• Top notch glass lens screen repair kit for iPhone 12 Pro Max
• Comes with all essential tools Small Phillips Screwdriver, Small Flathead Screwdriver, Pentalobe Screwdriver, Tri-Point Screwdriver, Plastic Opening Tools, Suction Cup, Nylon Spudger, Fine Tip Curved Tweezers, Micro Fiber Cleaning Cloth, SIM Card Ejection Tool
• Handy repair guide will guide you about each & every step of the repair process
• Manufactured particularly for iPhone 12 Pro Max to assure complete device compatibility
• Comes in a stylish white color